Drainage Bend Double Socket - 87.5 Degree x 110mm - Pack of 30

In stock
Only %1 left
Code
UB11090DPK30

Click or tap the image to open in fullscreen

Drainage Bend Double Socket - 87.5 Degree x 110mm - Pack of 30
From 1 reviews
More Information
Code UB11090DPK30
£117.86 £98.22 £2.23
Spend another £1500 to pay over time with Klarna

This 88-degree bend is one of the most popular fittings that we stock and has a couple of uses depending on the fitting. Most people refer to these bends as 90 degrees, but the reason that they are actually 88 degree is to create a natural fall to ensure that materials flowing through the bend keep on moving.

Single socket uses:

  • Most commonly used at the foot of a rainwater downpipe, where the downpipes join the drainage system, in conjunction with our D96 rainwater adaptor.

Double socket uses:

  • At the foot of a soil pipe to create a change of direction from vertical to horizontalIf you are thinking about using this at the foot of a soil pipe we would suggest you consider using the D571 87.5-degree rest bend which has a longer radius to eliminate potential blockages.
  • This bend can also be used at the foot of a rainwater downpipe, and again we recommend you use a D96 universal rainwater adaptor to make the connection.

The socketed ends of the fitting are designed to accept a length of pipe. If this pipe has been cut to length it should be chamfered and lubricated with our SG100 lubricant prior to insertion into the socket to ensure the best possible seal. The socketed end can also be used in conjunction with other fittings that have a pre-chamfered end, such as single-socket bends or gullies.

Please watch our overview video below

YOU MAY ALSO LIKE