Drainage Bend Single Socket - 30 Degree x 110mm
- Buy 1000000 for £2.98 £2.48 each and save 9.5%
|Guarantee||2 Year Manufacturer Guarantee|
|Specification||BS EN 1401-1|
This 30-degree bend is one of the most popular fittings that we stock, it can be used in a variety of situations in an underground drainage system.
The single socket bend comes with one end that is pre-chamfered so that it can be inserted into the socket of another fitting, such as a branch or an inspection chamber.
The socketed ends of the fitting are designed to accept a length of pipe. If this pipe has been cut to length it should be chamfered and lubricated with our SG100 lubricant prior to insertion into the socket to ensure the best possible seal. The socketed end can also be used in conjunction with other fittings that have a pre-chamfered end, such as single socket bends or gullies.
If you are unsure of the exact bend that you might need, why not use an adjustable bend? The clever design of this fitting allows it to be rotated to any angle between 0 and 90 degrees. Having one of these fittings on site can save a huge amount of time if the angles on your installation don't quite line up!
Please watch our overview video below