Aluminium Round Swaged Downpipe Bend - 112.5 Degree x 63mm PPC Finish Anthracite Grey

In stock
Code
2RB112-AG

Click or tap the image to open in fullscreen

Aluminium Round Swaged Downpipe Bend - 112.5 Degree x 63mm PPC Finish Anthracite Grey
More Information
Code 2RB112-AG
EAN Code 0755907203244
Brand ARP
Colour Anthracite Grey
Material Aluminium
Life Expected 60 Years
Specification R10/311 Rainwater Drainage Systems
Size 63mm
Profile Round
£22.22 £18.52
Spend another £1500 to pay over time with Klarna

Aluminium 112.5 degree downpipe bends are used to create a bend in the run of an aluminium downpipe or more commonly, create a swan neck. A swan neck is created to take the downpipe from the running outlet, around the fascia and soffit and back against the wall. This section is made by getting two downpipe bends, cutting a small piece of downpipe and fitting the small piece of pipe in between the bends.

For more information about how to install our swaged downpipe system, please take a look at our downpipe installation guide.
YOU MAY ALSO LIKE