Chrome Style Waste Bend - 90 Degree x 32mm

In stock
Code
CW10
More Information
Code CW10
EAN Code 5055149928727
Weight (kg) 0.077000
Angle 90 Degree
Brand FloPlast
Colour Chrome
Material Polypropylene
Guarantee 2 Year Manufacturer
Specification BS EN 1451-1:2000/BS 5254 1976
Size 32mm
£9.88 £8.23
You need to spend another £250.00 to qualify for 2.5% discount.

Chrome style waste bends are used to create  90 degree bends in a waste pipe system.

This fitting is available in 32mm and 40mm size options. The system is manufactured in the UK using state of the art technology to ensure a superb, blemish-free chrome effect finish.

This chrome style compression waste system is manufactured in the UK to BS EN 1451. It is commonly used to connect waste pipes of differing materials or those made by different manufacturers.

When making a compression joint, cut the pipe square and remove any burrs. Unscrew the nut from the fitting and remove it along with the washer and the rubber seal. Place these three components over the end of the pipe – first the nut, then the washer followed by the seal. The dished side of the rubber seal should face away from the nut and towards the fitting. Push the pipe into the fitting as far as it will go, slide the seal and washer forward into position in the fitting and tighten the nut.

The joint can be taken apart again if required, but always check that the rubber seal has not been damaged in any way as this will cause the joint to leak.

Click here to watch our video showing how to assemble a compression waste joint.

Chrome Style Multifit Compression waste Fittings

Chrome Style multifit compression waste fittings are ideal for use when connecting different waste pipe systems together or when the installation is in plain view, such as in a public bathroom or hotel room.

In compression waste systems the joints are not permanent, they can be demounted and re-made if necessary.

The watertight seal in chrome style compression waste systems is created by a large, dished rubber seal and a nylon washer. When the nut on the fitting is tightened, the seal is compressed on to the pipe in much the same way as a copper olive works in plumbing fittings.   

Our chrome style multifit compression fittings are made from polypropylene. They are manufactured in the UK by FloPlast, one of Europe’s leading suppliers of all types of gutter, soil, waste and underground drainage products.