Drainage Bend Double Socket - 45 Degree x 110mm
In stock
Only %1 left
Code
UB11045D
Product Overview
This 110mm 45 degree bend with a double socket is a reliable way to make a smooth change of direction on an underground run. Often specified as a 45 degree drainage bend or 45 degree elbow, it is commonly used at the entrance or exit of an inspection chamber or to align pipework neatly around obstructions.
Key Features
- Double socket ends accept 110mm pipe on both sides for quick push-fit assembly
- True 45 degree geometry for accurate directional changes and good flow
- Ideal for gentle realignment on straight runs and around chambers, branches and gullies
- Commonly used to create a change of direction in a pipe run or on the outlet of a 45 degree gully trap
- Use two bends together at the bottom of a soil pipe to create a long radius 90 degree bend
- Compatible with standard 110mm underground drainage systems
Installation Guidance
- Chamfer the cut pipe end and apply SG100 lubricant before insertion to achieve a watertight seal
- Push the pipe fully into each socket and confirm alignment and fall before backfilling
- For additional pipe and fittings, browse our 110mm drainage pipe range
Alternative Options
If the exact angle is uncertain, choose an adjustable bend that rotates from 0 to 90 degrees
Product Video
Watch the quick overview below for a closer look at how to use this bend effectively in an underground system.
