MDPE Coupling - 32mm
|Material||Polypropylene with acetal grip ring and Nitrile rubber O ring|
|Dimension||147mm (L) x 64.5mm (H)|
This joiner uses compression to make the joint between two lengths of MDPE pipe. Made from tough and long-lasting polypropylene, our MDPE fittings utilise an acetal grip ring and a Nitrile rubber O ring.
Pipe liners (or stiffeners as they are sometimes called) should always be used with this type of fitting.
It is good practise to always try and minimise the amount of joints used on any MDPE water installation wherever possible.
This fitting is WRAS approved. All of our MDPE fittings can be used on either blue (potable) MDPE pipe or black (non-potable) MDPE pipe.
Fittings for MDPE pipes
Modern compression style fittings are now the first choice for domestic water and gas mains. The connection is made utilising an actetal thermoplastic grip ring with a rubber O ring within the fitting. No specialist tools are needed to make the joint.
Connections are available from MDPE to a variety of different materials using our adaptors. Our standard stock range covers pipe sizes from 20mm to 63mm but larger sizes can be ordered for delivery within a couple of days if required.
If you require any further information please do not hesitate to contact us.