MDPE to BSP Adaptor - 32mm x 1" BSP Male
In stock
Code
MD32M
Code | MD32M |
---|
Our MDPE to male and female adaptors enable an MDPE pipe to be connected to a BSP thread.
The size of the BSP thread can also be reduced (female) or enlarged (male) by using a brass bush.
This fitting is WRAS approved. All of our MDPE fittings can be used on either blue water pipe or black non-potable water pipe.
Made from tough and long-lasting polypropylene, our MDPE fittings utilise an acetal grip ring and a Nitrile rubber O ring at the MDPE end.
Pipe liners (or stiffeners as they are sometimes called) should always be used at the MDPE end of the fitting.