MDPE to BSP Adaptor - 63mm x 1 1/4" BSP Male

In stock
Code
MD63M1
More Information
Code MD63M1
EAN Code 0691208231411
Brand PBSL Group
Colour Grey/ Black
Material Polypropylene with acetal grip ring and Nitrile rubber O ring
Style Male
Specification WRAS Approved
Size 63mm x 1 1/4"
£4.96 £4.13
You need to spend another £250.00 to qualify for 2.5% discount.

Our MDPE to male and female adaptors enable an MDPE pipe to be connected to a BSP thread.

The size of the BSP thread can also be reduced (female) or enlarged (male) by using a brass bush.

Made from tough and long-lasting polypropylene, our MDPE fittings utilise an acetal grip ring and a Nitrile rubber O ring at the MDPE end.

Pipe liners (or stiffeners as they are sometimes called) should always be used at the MDPE end of the fitting.

This fitting is WRAS approved. All of our MDPE fittings can be used on either blue (potable) MDPE pipe or black (non-potable) MDPE pipe.

Fittings for MDPE pipes

Modern compression style fittings are now the first choice for domestic water and gas mains. The connection is made utilising an actetal thermoplastic grip ring with a rubber O ring within the fitting. No specialist tools are needed to make the joint.

Connections are available from MDPE to a variety of different materials using our adaptors. Our standard stock range covers pipe sizes from 20mm to 63mm but larger sizes can be ordered for delivery within a couple of days if required.

If you require any further information please do not hesitate to contact us.