FloPlast Ogee Gutter Internal Angle - 90 Degree x 110mm x 80mm Cast Iron Effect

In stock
Code
RAN1CI

Click or tap the image to open in fullscreen

FloPlast Ogee Gutter Internal Angle - 90 Degree x 110mm x 80mm Cast Iron Effect
FloPlast Ogee Gutter Internal Angle - 90 Degree x 110mm x 80mm Cast Iron Effect
FloPlast Ogee Gutter Internal Angle - 90 Degree x 110mm x 80mm Cast Iron Effect
More Information
Code RAN1CI
EAN Code 5055149920264
Angle 90 Degree
Brand FloPlast
Colour Cast Iron Effect
Dimension 174mm (W) x 174mm (L) x 97mm (D)
Guarantee 20 Year
Material PVC-u
Specification BS EN 12200 / BS EN 607 / BS EN 1462
Weight (kg) 0.318000
Size 110mm x 80mm
£27.10 £22.58
Spend another £1500 to pay over time with Klarna

90 Degree Gutter Angles are used to turn the gutter around the corner of a building. As the ogee system is not symmetrical, internal and external corners are different fittings.

The product image clarifies the difference but essentially if you are stood in front of an internal corner, the corner comes towards you - on an external corner it goes away from you. Internal corners are most commonly found at the bottom of a valley on a roof.

You should always support a gutter angle by positioning a fascia bracket within 150mm on both sides of the angle. This will prevent the fitting from sagging when it is weighed down by water or snow.

YOU MAY ALSO LIKE