FloPlast Ogee Gutter Internal Stopend Left Hand - 110mm x 80mm Cast Iron Effect

In stock
Code
REN3CI

Click or tap the image to open in fullscreen

FloPlast Ogee Gutter Internal Stopend Left Hand - 110mm x 80mm Cast Iron Effect
FloPlast Ogee Gutter Internal Stopend Left Hand - 110mm x 80mm Cast Iron Effect
FloPlast Ogee Gutter Internal Stopend Left Hand - 110mm x 80mm Cast Iron Effect
More Information
Code REN3CI
EAN Code 5055149920332
Brand FloPlast
Colour Cast Iron Effect
Dimension 33mm (H) x 127mm (L) x 91mm (W)
Guarantee 20 Year
Material PVC-u
Orientation Left Hand
Specification BS EN 12200 / BS EN 607
Weight (kg) 0.061000
Size 110mm x 80mm
£10.48 £8.73
Spend another £1500 to pay over time with Klarna

Internal stopends are used in conjunction with another gutter fitting to cap off the end of the gutter system at that fitting, usually a running outlet. Stopend Outlets can also be used as an alternative to this method.

Because ogee is not a symmetrical system, stop ends are handed either right or left - the video below clarifies the difference.

The internal stop end is introduced into the fitting in exactly the same way as you would install a piece of gutter - the back edge of the stop end is installed first before gently pulling the front edge down and inside the clip of the fitting, compressing the stop end onto the rubber seal

You can compare both types of stopends, internal and external, in our short PBSL Group video below;

YOU MAY ALSO LIKE