Site Starter Pack - 110mm
Click or tap the image to open in fullscreen
| Code | SSP1 |
|---|
Product Overview
This 110mm underground drainage starter pack (often used as a 110mm site starter pack) gives you the core fittings needed to begin a run quickly and tidy up layout changes during groundworks. It is a convenient 110mm underground drainage kit that covers the most-used bends, junctions and couplers so you can set out, test and progress without delay.
What’s Included
- 10 x Double Socket Couplers
- 3 x 90 degree Bend Single Socket
- 2 x 90 degree Bend Double Socket
- 5 x 45 degree Bend Single Socket
- 5 x 30 degree Bend Single Socket
- 5 x 15 degree Bend Single Socket
- 2 x 90 degree T Junction Triple Socket
- 2 x 45 degree Y Junction Triple Socket
Pipe is not included. If you also need pipe, see our 110mm drainage pipe range.
Compatibility and Standards
All fittings are designed for standard 110mm underground drainage systems and supplied in terracotta for clear identification during installation and maintenance. Selected fittings feature ring seal socketed ends for quick, secure push-fit connections without specialist tools. Manufactured to BS EN 1401-1.
Installation Guidance
- Cut pipe squarely, chamfer the cut edge and apply a suitable pipe lubricant (such as SG100 lubricant) to aid assembly and achieve a watertight seal.
- Dry-fit first to confirm alignment and falls, then complete the push-fit connections.
- Follow best practice for trench preparation, bedding and backfill.
Add-ons and Next Steps
Build out your system with inspection chambers and soakaway crates as required, or add extra fittings from our 110mm drainage pipe category to complete the run.
