Solvent Weld Soil Bend Swivel - 90 Degree x 110mm Olive Grey
|Guarantee||1 Year Manufacturer Performance Guarantee|
|Specification||BS EN 1329-1:2000 / BS4514:2001|
Swivel bends, also sometimes referred to as pistol bends, are used to create a sharp 90 degree change of direction. They have a long spigot tail that is usually inserted into the socket of another fitting. The other end of the bend is a solvent socket.
This fitting is available in black and olive grey.
Solvent Weld Soil System
Our FloPlast solvent weld soil system is commonly used in both domestic and commercial installations. It has been rigorously tested by the British Standards Institute and holds the prestigious BS kitemark.
To make a solvent weld joint, ensure that the surfaces to be jointed are clean and free of swarf. Apply SC250 solvent cement to both the spigot and the socket, assemble the joint and give it a twist to ensure that full contact has been made. Clean off any excess solvent and allow 24 hours for the joint to cure.
Note – solvent weld joints are permanent and cannot be de-mounted once made.