Solvent Weld Waste Reducer - 50mm x 40mm Black
- Buy 1000000 for £1.60 £1.33 each and save 11%
|Dimension||Reduce from 50mm to 40mm|
|Guarantee||1 Year Manufacturer Performance Guarantee|
|Specification||BS EN 1455-1:2000|
This waste reducer is used when a 40mm waste pipe is connected into a 50mm pipe, usually with the 40mm pipe dropping into the 50mm pipe below it running towards the soil pipe.
It is usually used in the branch of a 50mm tee or in one end of a 50mm coupling.
Our solvent weld waste is manufactured in the UK to BS EN 1455 and is kitemarked.
To make a solvent weld joint, first ensure that the outer wall of the pipe and the inner wall of the fitting are both clean and free from grit or swarf. Apply SC250 solvent cement to both surfaces. Push the pipe fully into the fitting and give it a twist to ensure that full contact has been made. Clean off any excess solvent with a damp cloth and leave for 5 minutes to set. The installation should be left for 12 hours before testing.
Solvent weld joints are permanent - they cannot be demounted once the joint has been made. When using solvent cement, always work in a well ventilated area and keep the cement away from heat sources or naked flames. Avoid any contact with skin - if contact does occur then wash thoroughly with soap and water.
Solvent Weld Waste System
Solvent weld waste pipe and fittings have been used by professionals and homeowners for many years. When solvent cement is applied to the walls of the pipe and the fitting, it temporarily breaks down the surface wall of the ABS plastic. When the pipe is inserted into the fitting at this point, the two surfaces are quickly welded together and solidified to form a permanent watertight joint.
Our solvent weld pipes and fittings are supplied by FloPlast, one of the UK market leaders in the manufacture and supply of above and below ground drainage products.
Our ABS solvent weld waste systems are available in white, grey and black.
Orders placed by 12.00 noon will be delivered the next working day. Orders placed at weekends will be delivered on the following Tuesday. Read our delivery details for further information.
Our Returns Policy
You can return any items for a full refund (excluding any carriage charges) within 28 days of your purchase - the only exception being specially manufactured items such as fabricated gutter angles or profiles which cannot be returned. All returned items must be unused and in saleable condition. You should include a copy of your original purchase invoice with any goods that you return.
Please note that you are responsible for the cost of returning unwanted items. If you are unsure of how to go about arranging a carrier please let us know so that and we can assist you with this, although you should be aware that we cannot be held responsible for any carrier losses or damages prior to the goods being checked in at our warehouse.
Please click here to download a Goods Returns Form which you should enclose with any returned items. Our full postal address for returns is detailed on the Goods Returns Form.
Once the goods have been checked back into our warehouse we will arrange for the credit/debit card that you used for your original purchase to be refunded. Please allow fourteen days for the refund to be processed. Any items that have been ordered specially are excluded from this guarantee, as are any goods that are delivered ex-works such as sewage treatment plants or rainwater harvesting systems.
Read our returns policy for further details.
Our Returns Policy For Cast Iron Products From Hargreaves Foundry Products
If you wish to return any of our Cast Iron products, then please contact us as soon as possible. We can then liaise with the manufacturer and issue a returns form which will need to be returned to Hargreaves alongside the products. Our cast iron products come direct from Hargreaves Foundry (HF) in Halifax so returns will need to go directly back to them.
All return requests must be notified within 90 days of the goods being dispatched from HF and all damaged items must be notified within 24 hours of receipt of goods. All items must be returned in a saleable condition. Once agreed, the goods must be returned within 14 days from the date stated on the Return Form.
Please note that any bespoke items or specially painted RAL coloured items or Mech 416 Soil System pipes are non-returnable. Please be aware that all returns for Cast Iron Gutters and Soil & Drainage will incur a re-stocking charge of between 25% & 30% for exact details please view our Hargreaves returns policy.
The % charged is based on the net selling price of the original goods - this charge is unfortunately out of our control as it is levied on us by the manufacturer.
For full terms and conditions related to cast iron returns please consult our Hargreaves returns policy.